JUser: :_load: Unable to load user with ID: 947

Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Wednesday, 25 March 2015 00:00

Split flanges & pipe-flanges

Not to be confused with the most common entire flanges, the split flanges are composed of two half flanges assembled with bolts and nuts.

This product used together with the pipe-flanges is a practical and efficient junction system for the piping, aim of frequent maintenance works and/ or inspection.

Their use eliminates the need to cut and re-weld the pipes in the maintenance work and in some cases they act as reinforcement for the pipes with weakened areas.

They are manufactured in different kinds of steels and they are supplied provided with the certificate EN 10204 3.1 or EN 10204 3.2 (P.E.D.)

Wednesday, 25 March 2015 00:00

Pressure Vessel Clamps

Intended as closing system for pressure tanks, the clamps offer more advantages than the traditional closing system with screws and bolts.

In the design phase of the tanks the use of clamps avoids the drilling on the flange for the housing of the screws thus allowing to reduce the cover thickness without compromising the technical features for the closing.

In particular the speed to assemble and disassemble ensures shorter times both during installation of the tank and in the phase of maintenance and/ or inspection of the same.

Clamps are manufactured with carbon, alloy or stainless steel in a wide range of sizes and they are supplied fully finished, assembled and provided with the certificate EN 10204 3.1 or EN 10204 3.2 (P.E.D.).

A stock of the most commonly used sizes is available, which allows to satisfy a faster delivery also upon smallest request of the costumers.

Tuesday, 24 March 2015 00:00

Where we are

Monday, 23 March 2015 00:00


Quality is the foundation upon which the company has built and developed its business.
The policy requires a scrupulous traceability of each product along with a careful control of product during and after each production phase.
Thanks to this policy, the company can boast an outstanding quality management system and a diversified product certification.

  • Since 1987 TÜV AD Merkblatt W0/ TRD100 homologated, and actually TÜV AD2000 Merkblatt W0/TRD100 homologated for pressure vessel clamps/ split flanges/ flange-pipes.
  • Since 1996 UNI EN ISO 9000 certified, and actually UNI EN ISO 9001:2008 certified.
  • Issue of EN 10204 3.2 certificates to 97/23/EC P.E.D. specification (Pressure Equipment Directive) for pressure vessel clamps/ split flanges/ flange-pipes.
  • Since 2003 RINA homologated for split flanges.


Page 2 of 3

I cookie ci aiutano a ottimizzare i servizi offerti ai nostri clienti. Prosegui se sei d'accordo o leggi ulteriori informazioni nella nostra Informativa sulla tutela dei dati personali. Privacy Policy.

Se prosegui nella navigazione di questo sito acconsenti all´utilizzo dei cookie.